:: Journal of Korean Society of Industrial and Systems Engineering ::

About US +
- Aims and Scope
- Editorial Board
For Contributors +
Journal Search +

Journal Search Engine

Development of Stamping Die Quality Inspection System Using Machine Vision

Hyoup-Sang Yoon

Journal of Korean Society of Industrial and Systems Engineering :: Vol.46 No.4 pp.181-189

DOI:https://doi.org/10.11627/jksie.2023.46.4.181
Open abstract
Development of Portable Boiler Tube Health Evaluation System

Chang Min Lee, Han Sang Lee, Bum Shin Kim

Journal of Korean Society of Industrial and Systems Engineering :: Vol.46 No.3 pp.101-108

DOI:https://doi.org/10.11627/jksie.2023.46.3.101
Open abstract
A Study on the Proper Inspection Cycle Plan Through Reliability Analysis of One-Shot System

June-Young Lim, Hyeonju Seol

Journal of Korean Society of Industrial and Systems Engineering :: Vol.46 No.1 pp.48-54

DOI:https://doi.org/10.11627/jksie.2023.46.1.048
Open abstract
Determination of Key Factors and Evaluation of Their Importance in the Elevator Safety Quality Rating System for the Purpose of Adjusting the Elevator Inspection Cycle

Kyung-Min Roh, Kwan-Hee Han

Journal of Korean Society of Industrial and Systems Engineering :: Vol.45 No.4 pp.70-78

DOI:https://doi.org/10.11627/jksie.2022.45.4.070
Open abstract
A Case Study for Estimating the Defect Rate of PLC Using Sampling Inspection and Improving the Cause of Defects

In-Sun Moon, Dong-Hyung Lee

Journal of Korean Society of Industrial and Systems Engineering :: Vol.44 No.4 pp.128-135

DOI:https://doi.org/10.11627/jksie.2021.44.4.128
Open abstract
Analysis and Probability of Overestimation by an Imperfect Inspector with Errors of Triangular Distributions

Moon Hee Yang, Jae Hyung Cho

Journal of Korean Society of Industrial and Systems Engineering :: Vol.41 No.2 pp.117-132

DOI:https://doi.org/10.11627/jkise.2018.41.2.117
Open abstract
Optimal Inspection Policy for One-Shot Systems Considering Reliability Goal

Seung-Woo Jeong, Young-Bae Chung

Journal of Korean Society of Industrial and Systems Engineering :: Vol.40 No.4 pp.96-104

DOI:https://doi.org/10.11627/jkise.2017.40.4.096
Open abstract
A Profile Tolerance Usage in GD&T for Precision Manufacturing

Kyung-Wook Kim, Sung-Ho Chang

Journal of Korean Society of Industrial and Systems Engineering :: Vol.40 No.2 pp.145-149

DOI:https://doi.org/10.11627/jkise.2017.40.2.145
Open abstract
A Study On Development of Safety Inspection Evaluation Method in the Construction Using PSM Method

Journal of Korean Society of Industrial and Systems Engineering :: Vol.26 No.3 pp.24-30

DOI:
Open abstract
Decision-making Method of Optimum Inspection Interval for Plant Maintenance by Genetic Algorithms

Journal of Korean Society of Industrial and Systems Engineering :: Vol.26 No.2 pp.1-8

DOI:
Open abstract