:: Journal of Korean Society of Industrial and Systems Engineering ::

About US +
- Aims and Scope
- Editorial Board
For Contributors +
Journal Search +

Journal Search Engine

Casting Layout Design Using Flow & Solidification Analysis-Automotive Part(Oil Pan_BJ3E)

Hong-Kyu Kwon

Journal of Korean Society of Industrial and Systems Engineering :: Vol.42 No.1 pp.1-7

DOI:https://doi.org/10.11627/jkise.2019.42.1.001
Open abstract
Priority Analysis of Project Stage-wise Risk Factors : Focusing on New Product Development Projects in ICT Industry

Heeseok Jang, Sungyong Choi, Minho Lee

Journal of Korean Society of Industrial and Systems Engineering :: Vol.41 No.3 pp.72-82

DOI:https://doi.org/10.11627/jkise.2018.41.3.072
Open abstract
Casting Layout Design Using CAE Simulation : Automotive Part(Oil Pan_BR2E)

Hong-kyu Kwon

Journal of Korean Society of Industrial and Systems Engineering :: Vol.40 No.1 pp.35-40

DOI:https://doi.org/10.11627/jkise.2017.40.1.035
Open abstract
A Case Study on Developing Automotive Part(Housing) by Filling and Solidification Analysis

Byoung-Guk Jeong, Hong-Kyu Kwon

Journal of Korean Society of Industrial and Systems Engineering :: Vol.38 No.1 pp.44-51

DOI:https://doi.org/10.11627/jkise.2014.38.1.44
Open abstract
A Case Study on Casting Layout Design of Automotive Oil Pan_DX2E Using Computer Simulation

Hongkyu Kwong^†

Journal of Korean Society of Industrial and Systems Engineering :: Vol.36 No.4 pp.71-76

DOI:https://doi.org/10.11627/jkise.2013.36.4.71
Open abstract
Case Study for Casting Design of Automobile Part(Gear Box) Using CAE

Moo-Kyung Jang, Hongkyu Kwon

Journal of Korean Society of Industrial and Systems Engineering :: Vol.35 No.4 pp.179-185

DOI:https://doi.org/10.11627/jkise.2012.35.4.179
Open abstract
Case Study for Developing Automobile Part (Steering Wheel) using Vacuum Die-Casting Mold

Moo-Kyung Jang^†, Kwon Hong-Kyu

Journal of Korean Society of Industrial and Systems Engineering :: Vol.35 No.2 pp.196-203

DOI:
Open abstract